Mercedes-Benz E-Class Wagon, Руководство оператора

Страница: 164 / 510

% The remote control for the garage door drive
is not included in the scope of delivery of the
garage door opener.
Synchronizing the rolling code
Requirements:
R
The garage door system uses a rolling code.
R
The vehicle must be within range of the
garage door or exterior gate drive.
R
The vehicle as well as persons and objects,
are located outside the sweep of the garage
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press previously programmed button 1 , 2
or 3 repeatedly, until the door closes.
When the door closes, programming is com‐
pleted.
% Please also read the operating instructions
for the garage door drive.
Troubleshooting when programming the
remote control
#
Check if the transmitter frequency of remote
control 5 is supported.
#
Replace the batteries in remote control 5 .
#
Hold remote control 5 at various angles at
a distance between 1 in (1 cm) to 3 in (8 cm)
in front of the inside rearview mirror. You
should test every position for at least 25 sec‐
onds before trying another position.
162 Driving and parking