Mercedes-Benz E-Class Wagon, Руководство оператора

Страница: 128 / 510

Switching on the high beam manually
#
Vehicles with Adaptive Highbeam Assist:
Turn the light switch to the L position.
R
Press the combination switch beyond the
pressure point in the direction of
arrow 1 .
When the high beam is activated, the indicator
lamp for low beam is deactivated and replaced
by the indicator lamp for the high beam.
#
To switch off the high beam: move the
combination switch back to its starting posi‐
tion.
#
To indicate briefly: press the combination
switch briefly up to the pressure point in the
direction of arrow 2 or 4 .
The corresponding turn signal light flashes
three times.
#
To indicate for a duration: press the combi‐
nation switch beyond the pressure point in
the direction of arrow 2 or 4 .
Activating/deactivating the hazard warning
light
#
Press button 1 .
Cornering light
Cornering light function
The cornering light improves the illumination of
the carriageway over a wide angle in the turning
direction, enabling better visibility on tight
bends, for example. It can be activated only
when the low beam is switched on.
The function is active:
R
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned.
126 Light and visibility