23
Electrohydraulic cab tilt system
Tilting t
he cab
Towing and Recovery | Actros, Antos (Model 963), Arocs (Model 964)
Information label on entryway steps
Cab tilt pump on right of entryway steps
Tilting the cab forwards with the button on the cab tilt
pump
M
Swing flap on right of entryway steps upwards.
M
Check swivel direction of valve lever on information label
on entryway steps.
M
Move valve lever on cab tilt pump to tilt position
2
.
M
Press and hold the button
=
until the cab is tilted to the
forward end position. When the pump noise starts to get
louder, the cab is at the forward end position.
Tilting the cab back to the driving position with the
button on the cab tilt pump
M
Move valve lever on cab tilt pump to driving position
1
.
M
Press and hold the button
=
until the cab is tilted back
to the rear end position. The cab locks automatically.
M
Swing down flap on right at entryway steps so that it
clicks into place.
M
In the cab, press bottom of button
C
. The indicator
lamp in button
C
goes out.
M
Check that the indicator lamp
º
in the instrument
cluster goes out after the engine starts. If the indicator
lamp
º
goes out, the cab is locked. If the indicator
lamp does not go out, repeat the procedure and tilt the
cab back again.
