Key positions
Key
g
To remove the key
1
Power supply for some consumers, such
as the windscreen wipers
2
Ignition (power supply for all consumers)
and drive position
3
To start the engine
i
Even if the key is not for the vehicle in
question, it will still turn in the ignition lock.
The ignition is not switched on. The engine
cannot be started.
KEYLESS GO*
If you press the Start/Stop button repeatedly
without depressing the brake pedal, its func-
tion corresponds to the different key posi-
tions in the ignition lock.
If you depress the brake pedal and press the
Start/Stop button, the engine starts immedi-
ately.
X
Position 0: if Start/Stop button
:
has not
yet been pressed, this corresponds to "key
removed".
X
Position 1: press Start/Stop button
:
once.
It is now possible to switch on the wind-
screen wipers, for example.
i
If you open the driver's door in this posi-
tion, the power supply is disconnected
again.
X
Position 2 (ignition): press Start/Stop but-
ton
:
twice.
i
If you press Start/Stop button
:
in this
position once and the driver's door is open,
the power supply is disconnected again.
Removing the Start/Stop button
You can remove the Start/Stop button from
the ignition lock and start the vehicle with a
key as usual.
i
You do not need to remove the Start/
Stop button from the ignition lock when you
leave the vehicle.
X
Remove Start/Stop button
:
from ignition
lock
;
.
i
If you switch from key mode to KEYLESS
GO mode, the system requires a two-sec-
ond recognition period before you can use
the Start/Stop button.
Key positions
75
Cont
ro
ls
* optional
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 75
Z
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:15:49; WK