E 200 CDI BlueEFFICIENCY
E 220 CDI BlueEFFICIENCY
E 220 CDI BlueEFFICIENCY (Belgium)
E 250 CDI BlueEFFICIENCY
E 350 CDI BlueEFFICIENCY
E 350 CDI 4MATIC BlueEFFICIENCY
E 350 BlueTEC
MB Sheet number
Vehicles with a diesel par-
ticle filter
228.51, 229.31, 229.51
i
In the event that the:
R
engine oil brand
R
grade (MB Sheet number)
R
SAE classification (viscosity)
is not available, you can use another min-
eral or synthetic engine oil which has been
approved by Mercedes-Benz. You must
then have an oil change carried out at the
earliest possible opportunity.
Mixing oils reduces the benefits of high-
grade engine oil.
!
Do not use lubricant additives, as they can
lead to increased wear and damage to
mechanical assemblies. The use of lubri-
cant additives will result in a restriction of
your warranty.
Engine oil viscosity
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity,
this means it is thick; a low viscosity means
that it is thin.
Select the SAE classification (viscosity) of the
engine oil according to the outside tempera-
ture. The following table shows you the vis-
cosity classes to be used depending on the
average air temperature.
Capacities
The following values refer to an oil change
including the oil filter.
Vehicle model
Capacity including
oil filter
E 200 CGI BlueEF-
FICIENCY
E 250 CGI BlueEF-
FICIENCY
5.5 l
E 200 CDI BlueEF-
FICIENCY
E 220 CDI BlueEF-
FICIENCY
E 220 CDI BlueEF-
FICIENCY (Bel-
gium)
E 250 CDI BlueEF-
FICIENCY
6.5 l
Service products and capacities
337
Tech
nical
da
ta
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 337
Z
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:17:32; WK