
X
To install: insert one bracket
;
into both
the left and the right loading rails and slide
it to the desired position (
Y
page 203).
X
Insert telescopic rod
:
into brackets
;
and, while doing so, press release but-
ton
?
and push the rod downwards until it
engages.
X
Make sure that locking button
=
on brack-
ets
;
is pressed.
This keeps brackets
;
in place on the
loading rail.
X
To remove: press release button
?
on
respective bracket
;
and remove tele-
scopic rod
:
by pulling it upwards and out.
Stowage well under the boot floor
(Saloon)
TIREFIT, the vehicle tool kit, etc. are located
in the stowage well.
X
To open: pull handle
:
upwards.
X
Hook handle
:
into rain trough
;
.
!
Remove the handle again before closing
the boot lid and snap it in tightly to prevent
the handle flap from protruding. Otherwise,
you could damage the handle.
EASY-PACK folding floor with stow-
age compartment under the luggage
compartment floor* (Estate)
G
Risk of injury
Do not carry unsecured objects under the
EASY-PACK folding luggage-compartment
floor if it is open.
Otherwise, you and other vehicle occupants
could be injured by objects being thrown
around the vehicle in the event of sharp brak-
ing, a sudden change in direction or an acci-
dent.
A removable insert under the EASY-PACK
folding luggage-compartment floor contains
the parts of the EASY-PACK load-securing
kit* and a folding box. Beneath this, you will
find the TIREFIT kit, the "Minispare" emer-
gency spare wheel*, the vehicle tool kit, etc.
Opening and closing the EASY-PACK
folding luggage-compartment floor
!
When the EASY-PACK folding luggage-
compartment floor is fully open, do not
push down on it as this may damage the
EASY-PACK folding luggage-compartment
floor's hinges.
204
Loading and stowing
Co
ntro
ls
* optional
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 204
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:16:47; WK