
Special additives
!
Only use AdBlue
®
compliant with ISO
22241. Do not add any special additives to
AdBlue
®
and do not dilute it with water.
Doing so can destroy the BlueTEC
®
exhaust
gas aftertreatment system.
Damage resulting from the use of such
additives or from water is not covered by
the Mercedes-Benz implied warranty.
Purity
The purity of AdBlue
®
is particularly important
for avoiding malfunctions in the exhaust gas
aftertreatment system.
If AdBlue
®
is pumped out of the AdBlue
®
tank,
e.g. during repair work, it must not be
returned to the tank again as the purity of the
fluid can no longer be guaranteed.
!
Impurities in AdBlue
®
(e.g. due to other
service products, cleaning agents or dust)
result in increased emission values, system
malfunctions, catalytic converter damage
or engine damage.
Vehicle model
Total capacity of
the AdBlue
®
tank
E 350 BlueTEC
24.5 l
Engine oil
Only Mercedes-Benz approved engine oils
may be used in Mercedes-Benz engines.
A list of the engine oils tested and approved
in accordance with the Mercedes-Benz Spec-
ifications for Service Products can be called
up by visiting http://bevo.daimler.com and
entering the MB Sheet number. Further infor-
mation on tested and approved engine oils
can be obtained from any Mercedes-Benz
Service Centre. Engine oils which have been
approved by Mercedes-Benz have the MB
Sheet number indicated on the oil container
under the "MB approval" notice. The table
shows which MB Sheet number applies to
which engine:
E 200 CGI BlueEFFI-
CIENCY
E 250 CGI BlueEFFI-
CIENCY
E 300
47
E 350
47
E 350 4MATIC
E 350 CGI BlueEFFI-
CIENCY
E 500
E 500 4MATIC
E 63 AMG
48
MB Sheet number
229.3, 229.5,
229.51
229.3, 229.5 mm
229.5
47
Only for certain countries.
48
Restriction: only SAE 0W-40 engine oils may be used.
336
Service products and capacities
Technical
data
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 336
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:17:32; WK