Setting the specified minimum dis-
tance for Distronic Plus
You can set the specified minimum distance
for Distronic Plus by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
Distronic Plus keeps to the vehicle in front,
dependent on vehicle speed. You can see this
distance in the multi-function display
(
Y
page 145).
X
To increase: turn thumbwheel
;
towards
=
.
Then, Distronic Plus maintains a greater
distance between your vehicle and the
vehicle in front.
X
To decrease: turn thumbwheel
;
towards
:
.
Then, Distronic Plus maintains a shorter
distance between your vehicle and the
vehicle in front.
i
Make sure that you maintain the mini-
mum distance to the vehicle in front
required by law. Adjust the distance to the
vehicle in front if necessary.
Distronic Plus displays in the speedom-
eter
When Distronic Plus is activated, one or two
segments
;
in the set speed range light up.
i
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for Distronic Plus.
If Distronic Plus detects a vehicle in front,
segments
;
between speed of the vehicle in
front
:
and stored speed
=
light up.
Distronic Plus displays in the multi-
function display
In the Assistance menu (
Y
page 130) of the
on-board computer, you can select the dis-
tance display and activate or deactivate the
PRE-SAFE
®
Brake*.
Display when Distronic Plus is switched
off
X
Select the
Distance display
function
using the on-board computer
(
Y
page 130).
When Distronic Plus is deactivated, you will
see the following in the multi-function display:
Driving systems
145
Controls
* optional
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 145
Z
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:16:18; WK