Mercedes-Benz 2008 SLK-Class, Руководство пользователя

Страница: 232 / 273

Flat tyre
229
1
– 5 Wheel bolts
X
Tighten the wheel bolts evenly in a cross-
wise pattern in the sequence indica-
ted ( 1 to 5 ). The tightening torque must
be 110 Nm.
G
Risk of accident
Have the tightening torque checked imme-
diately after a wheel is changed. The wheels
could work loose if they are not tightened
to a tightening torque of 110 Nm.
X
Turn the jack back to its initial position and
store it and the rest of the vehicle tool kit
in the boot.
i
If the roof is closed you can transport the
faulty wheel in the boot. A protective film
is provided with the collapsible emergency
spare wheel.
X
Pack the faulty wheel in the protective film
included with the collapsible emergency
spare wheel* and transport the wheel in
the boot.
i
When you are driving with the collapsible
emergency spare wheel* fitted, the tyre
pressure loss warning system* cannot
function reliably.
Stowing a used collapsible emergency
spare wheel*
If you wish to stow a used collapsible emer-
gency spare wheel* in the vehicle, you must
follow the steps below, otherwise you will not
be able to stow it. We recommend that this
work is carried out at a specialist workshop.
!
Only place the collapsible emergency
spare wheel* in the vehicle when it is dry.
Otherwise, moisture may remain in the
boot.
X
Unscrew the valve cap from the valve.
X
Remove the valve extractor from the vehi-
cle tool kit.
X
Unscrew the valve insert from the valve and
release the air.
i
Fully deflating the tyres can take a few
minutes.
X
Screw the valve insert back into the valve.
X
Screw the valve cap back on
X
Put the protective film provided over the
collapsible emergency spare wheel*.
X
Store the collapsible emergency spare
wheel* in the spare wheel well under the
luggage compartment.
X
Fasten the collapsible emergency spare
wheel* in place through the protective film
using the screw.
Practical advice
* optional
171_AKB; 3; 4, en-GB
vpfaff7,
2007-11-13T10:50:25+01:00 - Seite 229