Mercedes-Benz 2008 SLK-Class, Руководство пользователя

Страница: 74 / 273

Seat belts
71
1
Belt loop
2
Belt tongue
3
Buckle
4
Release button
Routing the belt
X
Adjust the seat and move the backrest to
an almost vertical position (
Y
page 59).
X
Pull the belt smoothly through belt loop
1 .
X
Route the belt over the centre of the shoul-
der without twisting it.
X
Engage belt tongue 2 into buckle 3 .
X
If necessary, pull upwards on the shoulder
section of the belt to tighten the belt across
your body.
Routing the belt
X
Press release button 4 and guide belt
tongue 2 back towards belt loop 1 .
Belt warning for driver and front
passenger
The < seat belt warning lamp in the instru-
ment cluster reminds you that all occupants
should fasten their seat belts. The < seat
belt warning lamp may light up continuously
or it may flash. Additionally, there may be a
warning tone.
The
< seat belt warning lamp goes out and
the warning tone ceases when the driver and
the front passenger have fastened their seat
belt.
For certain countries only: regardless of
whether the driver or the front passenger is
already secured, the < seat belt warning
lamp lights up for six seconds after the engine
has been started. The < seat belt warning
lamp then goes out if both the driver and the
front passenger have fastened their seat belt.
i
Further information about the < seat
belt warning lamp (
Y
page 193).
Correct driver's seat position
1
Steering wheel
2 Seat belt
3
Seat
Controls
171_AKB; 3; 4, en-GB
vpfaff7,
2007-11-13T10:50:25+01:00 - Seite 71