background image

More user manuals on 

ManualsBase.com

Vehicle status messages in the multifunction display

504

Display messages

Possible cause/consequence

Possible solution

Right Side Curtain

Airbag Malfunction

Service Required

The right window curtain air bag may not
work properly.

X

Drive with added caution to the nearest
authorized Mercedes-Benz Center.

G

Warning!

In the event a malfunction of the SRS is indicated as outlined above, the SRS may not be operational.
For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked.
Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal injury, or it might deploy
unexpectedly and unnecessarily which could also result in injury.

Practical hints

Содержание 2008 CL 550 4MATIC













































































































































































































































































































































































































































































































































































































Отзывы: