Mercedes-Benz 2008 CL 550 4MATIC, Руководство оператора

Страница: 351 / 588

More user manuals on
ManualsBase.com
Driving systems
349
Adjustment in 1 mph (Canada: 1 km/h)
increments
i The set speed value is increased or
decreased in 1 mph (Canada: 1 km/h)
increments each time you lift or press the
cruise control lever up or down to the
resistance point.
X Briefly lift the cruise control lever up to the
resistance point in direction of arrow
1
to
increase or press the cruise control lever
down to the resistance point in direction of
arrow
2
to decrease.
X
Release the cruise control lever.
The new speed is set and the vehicle will
accelerate or decelerate.
Adjustment in 5 mph (Canada: 10 km/h)
increments
i
The set speed value is increased or
decreased in 5 mph (Canada: 10 km/h)
increments each time you lift or press the
cruise control lever up or down past the
resistance point.
X
Briefly lift the cruise control lever up past
the resistance point in direction of arrow
1
to increase or press the cruise control
lever down past the resistance point in
direction of arrow
2
to decrease.
X
Release the cruise control lever.
The new speed is set and the vehicle will
accelerate or decelerate. Keep in mind that
it may take a brief moment until the vehicle
has reached the set speed.
Resume last stored speed
G
Warning!
The set speed stored in memory should
only be set again if prevailing road
conditions and legal speed limits permit.
Possible acceleration or deceleration
differences arising from returning to the
preset speed could cause an accident and/
or serious injury to you and others.
X
Briefly pull the cruise control lever in
direction of arrow
4
.
If no speed is stored, the current speed is
set and stored.
X
Remove your foot from the accelerator
pedal.
The last stored speed is deleted from memory
when the engine is turned off.
Hill start assist system
G
Warning!
The hill start assist system is not designed
to function as a parking brake and does not
prevent the vehicle from moving when
parked on an incline.
Always engage the electronic parking brake
in addition to shifting the automatic
transmission into park position
P.
On uphill grades with a gradient angle of more
than 5°, the hill start assist system maintains
the pressure in the brake system for
approximately 1 second after you have
released the brake pedal. Therefore, you can
start off smoothly without the vehicle moving
immediately after releasing the brake pedal.
X
Depress the brake pedal.
X
Shift the automatic transmission into drive
position
D or reverse gear R.
X
Release the brake pedal.
X
Carefully depress the accelerator pedal.
The hill start assist system is inactive
R
when starting off on a level road or downhill
grades
R
with the automatic transmission in neutral
position
N
Controls in detail
Z