20
10.4.1 Removing the front panel
Removing the front panel
Use a suitable tool to unscrew the screws (
1
) of the front
panel (
2
) and remove the front panel.
10.4.2 Removing the device carrier
Loosening the device carrier
The enclosure has a total of twelve screws that need to be
loosened (socket side, underside, sides).
Use a suitable tool to unscrew the screws (
1
) on the
exterior of the enclosure.
Removing the device carrier
Loosen the strain relief of the screwed cable gland of
the supply line at the rear of the device.
Pull the device carrier (
1
) with all of the fitted compo-
nents out of the enclosure, towards the front.
Adjust the supply line at the rear of the device by hand
as needed.
10.4.3 Removing sockets
Loosen the supply leads of the relevant flanged socket at
the protective element, or at the socket.
Loosen the fastening screws of the flanged socket.
Remove the flanged socket.
