16
Procedure:
Remove any existing dust and soil with a brush first.
Use a clean, dry cleaning cloth to wipe off the power
distribution box.
9.2 Cleaning with a damp cloth
Remove any existing dust and soil with a brush with soft
bristles first.
For wet cleaning, we recommend using clean water, wit-
hout any cleaning agents, and a clean cleaning cloth, suita-
ble for plastic surfaces.
WARNING
Contact with live parts – Life-threatening danger
due to electric shock
Take the power distribution box out of service before
cleaning it with a damp cloth.
Disconnect the plug of the supply line.
Close all protective devices (e. g. inspection window,
hinged lids for sockets).
Only clean the power distribution box from the outside.
ATTENTION
Material damage of the device due to incorrect clea-
ning
Close all protective devices.
Only clean the power distribution box from the outside.
Do not use running water and ensure that water
cannot reach live parts.
Do not use compressed air or high-pressure cleaning
devices.
Do not use aggressive cleaning agents or chemicals.
Check with MENNEKES whether cleaning agents are
approved, if necessary.
Procedure:
Remove any existing dust and soil with a brush first.
Use water to moisten the clean cloth and thoroughly
wipe off the power distribution box.
Then use a clean cleaning cloth to wipe the device dry.
