Memmert IF 1060, Руководство по эксплуатации

Страница: 15 / 48

D33363 | Date 06/2016 15
Setup and description
2.10 Ambient conditions
Ź
The appliance may only be used in enclosed rooms and under the following ambient
conditions:
Ambient temperature
+5 º C to +40 º C
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2
Altitude of installation max. 2,000 m above sea level
Ź
The appliance may not be used in areas where there is a risk of explosion. The ambient air
must not contain any explosive dusts, gases, vapours or gas-air mixtures. The appliance is
not explosion-proof.
Ź
Heavy dust production or aggressive vapours in the vicinity of the appliance could lead to
sedimentation in the interior and, as a consequence, could result in short circuits or dam-
age to electrical parts. For this reason, sufficient measures to prevent large clouds of dust
or aggressive vapours from developing should be taken.
2.11 Scope of delivery
Ź
Power cable
Ź
Tilt protection
Ź
One or two sliding steel grids (load capacity 30 kg each)
Ź
The operating instructions at hand
Ź
Calibration certificate
2.12 Optional accessories
Ź
AtmoCONTROL software for reading out
and processing of protocol log files
Ź
USB to Ethernet converter (Fig. 7 ). Makes
it possible to connect the appliance's
network interface (see page 12) to the
USB port of a computer / laptop.
Ź
Reinforced, sliding steel grids with a load
capacity of 60 kg each (for appliance size
110 and larger)
Fig. 7 Converter USB to Ethernet