10
D32802 | Date 11/2018
Putting into operation
3. Putting into operation
3.1 Assembling the exhaust air unit
Warning! Danger to life due to electric shock. When assembling the
exhaust air unit, the chamber must not be connected to the power
supply.
1. Plug the connector of the
exhaust air unit into the
cable socket on the back
of the appliance (Fig. 3,
1). Stow away the cable in
the housing of the
exhaust air unit (2).
2. Insert the exhaust air
unit with the pipe socket
into the entry port in the
back of the chamber (Fig.
4) and attach it to the
chamber with the eight
Torx screws included (Fig.
5). Make sure that the ex-
haust pipe points upwards
(Fig. 6).
Fig. 4
Insert the
exhaust air unit in the
Fig. 4
Fig. 4
back of the chamber
Fig. 5
Screw the exhaust air unit
tight
Fig. 5
Fig. 5
Fig. 6
The ex-
haust pipe needs to
Fig. 6
Fig. 6
point up
3. Remove the three silicone plugs that are located at the centre and at the lower left
and right of the interior.
1
2
Fig. 3
Connect the leads
