S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
y
y
o
o
u
u
r
r
p
p
r
r
i
i
n
n
t
t
e
e
r
r
12 July 2011 - v4.0
Confidential.
Page 27 of 99
13.
When the printhead cartridge is fully inserted into the printer rotate it to a vertical position
as shown.
14.
Slowly close the printhead latch. The fluidic couplings should advance and seal to the
printhead cartridge.
15.
Close the printhead latch.
When the printhead latch is closed, the printer will prime, clean and cap the printhead
automatically. This operation will generally take a minute or two, and will be obvious
from sounds emanating from the printer.
The Power On/Off button will be blinking during this process. When the button stops
blinking your printhead cartridge has been installed.
If the printer does not seem to be priming after closing the printhead latch contact support
personnel as there may be a hardware problem.
All the blinking color ink supply lamps should cease to blink during printhead priming.
There may be a continuing low-level sound issued by the printer after printhead installation, even
with the Power On/Off button lit and steady. You can ignore this.
This is due to printer maintenance operation which will not interfere with your printing.