S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
y
y
o
o
u
u
r
r
p
p
r
r
i
i
n
n
t
t
e
e
r
r
12 July 2011 - v4.0
Confidential.
Page 21 of 99
3.
Remove the upper pull tabs attached to each ink tank (see the
Ink tanks
section on page
15) before inserting the tanks into their slots on the printer. Save the upper pull tab by
sticking it on the front of the corresponding ink tank as shown.
This will be used to re-seal the ink tank vantilation hole on the top of the ink tank when
you remove the ink tank for transportation (see
Remote relocation
on page 95).
4.
There is a specific ink tank slot for each color. Check the color coding on the ink tank and
the slot and insert each ink tank into its respective ink tank slot, as shown.
Note the double black ink tank fits into the rightmost slot.
DO NOT apply excessive force when inserting each ink tank in its slot.
There is a mechanical key on each ink tank that prevents it being inserted into the wrong slot in
the printer. Each slot is color-coded. If you have any difficulty inserting any ink tank, check its
color and try another slot.
5.
Close the ink tank slot lids, ensuring they snap down firmly.
6.
Close the printer cover and allow at least two minutes for the ink to fill the ink channels
in the printer.