Mellanox Technologies MTS3610D-6UNC, Руководство пользователя

Страница: 46 / 73

FabricIT Management Rev 1.7
Mellanox Technologies 46
8 FabricIT Management
FabricIT EFM is a software based management system that can be run with either a command line
interface or with a GUI interface. The GUI interface can be run through the Web. A license is
required for full use of FabricIT. The standard management module, without a license, allows for
managing the switch system using the Web interface or the command line interface and software
supplied on the management chip. Make sure to register your FabricIT license to enable all of the
available commands and functions.
See the FabricIT EFM User Manual for instructions and commands available to manage the
switches and fabric.
8.1 Downloading FabricIT Software and Documents
To download FabricIT software and documentation, please visit the following Web page:
FabricIT http://www.mellanox.com/content/pages.php?pg=fabric_it_login .
Note that you will need to enter the License Entitlement number and the chassis S/N to obtain the
software and documentation, and also to generate an EFM license that enables extended FabricIT
management and inspection features on your switch system.
8.2 Installing Licenses
A license for extended FabricIT management and inspection features with FabricIT EFM software
is available for an additional licensing fee.
8.2.1 FabricIT Management and Inspection License
To activate the extended FabricIT management and inspection features you need to install the
license that was purchased along with the switch system. Without the license, you will not be able
to run a Subnet Manager on the switch nor run advanced fabric diagnostics.
For information on installation, please refer to the FabricIT Enterprise Fabric Management Soft-
ware CLI User’s Manual .