Mellanox Technologies MTS3610D-6UNC, Руководство пользователя

Страница: 25 / 73

19U QSFP SDR/DDR/QDR InfiniBand Switch Platform User’s Manual Rev 1.7
Mellanox Technologies 25
4. Move the chassis over the shelf. Place the chassis so that the face plate of the chassis is a few
inches from the vertical rack support.
5. Lower the chassis onto the shelf.
6. Remove the mechanical lifting device.
7. Place ten caged nuts into the vertical rack support at the locations corresponding to the holes in
the chassis faceplate.
Figure 16: Face Plate Mounting Bolt Locations
8. Slide the chassis onto the shelf until the face plate of the chassis touches the vertical rack sup-
port.
9. Screw the bolts through the faceplate into the caged nuts, and tighten all ten bolts and nuts.
10.Place the lock down bar over the lip of the MTS3610 and align the holes in the lock down bar
with the holes in the shelf.
Holes in the faceplate for
mounting on the rack