MetroX 12-Port QSFP InfiniBand Long Haul System Hardware User Manual
Rev 1.1
Mellanox Technologies
37
Table 12 - Configuration Wizard Session - IP Zeroconf Configuration
Wizard Session Display - IP Zeroconf Configuration (Example)
Mellanox configuration wizard
Do you want to use the wizard for initial configuration? y
Step 1: Hostname? [switch-112126]
Step 2: Use DHCP on mgmt0 interface? [yes] no
Step 3: Use zeroconf on mgmt0 interface? [no] yes
Step 4: Default gateway? [For example:192.168.10.1]
Step 5: Primary DNS server?
Step 6: Domain name?
Step 7: Enable IPv6? [yes] yes
Step 8: Enable IPv6 autoconfig (SLAAC) on mgmt0 interface? [no] no
Step 9: Admin password (Enter to leave unchanged)?
Step 9: Confirm admin password? (Enter to leave unchanged)?
You have entered the following information:
1.Hostname: switch-112126
2.Use DHCP on mgmt0 interface: no
3.Use zeroconf on mgmt0 interface? [no] yes
4.Default gateway: 192.168.10.1
5.Primary DNS server:
6.Domain name:
7.Enable IPv6: yes
8.Enable IPv6 autoconfig (SLAAC) on mgmt0 interface: no
9.Admin password (Enter to leave unchanged): (unchanged)
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
Configuration changes saved.
To return to the wizard from the CLI, enter the "configuration jump-start"
command from configure mode. Launching CLI...
switch-1 >
