Mellanox Technologies MetroX MTX6100-2SFS, Руководство пользователя по оборудованию

Страница: 34 / 71

Installation Rev 1.1
Mellanox Technologies 34
Figure 25: Console Port
Step 2.
Configure a serial terminal program (for example, HyperTerminal, minicom, or Tera Term) on
your host PC with the settings described in
Table 10
.
Step 3.
Login (from a serial terminal program) as admin and use admin as password. This starts the
Mellanox configuration wizard.
Step 4.
Go through the Mellanox configuration wizard. Table 11 shows an example of a wizard session.
Make sure to connect to the Console RJ-45 port of the switch and not to the (Ethernet)
MGT port.
No remote IP connection is available at this stage.
Table 10 - Serial Terminal Program Configuration
Parameter Setting
Baud Rate 9600
Data bits 8
Stop bits 1
Parity None
Flow Control None
TX6100
CONSOLE
MGT
12 11
Connect the host
PC to here.