30
31
STORAGE
If the appliance is not used daily, you are advised to do
the following every time you have used it:
• Disconnect power supply to the appliance.
• Turn off the water supply and disconnect the hose
from the water intake.
• Drain any remaining water in the water intake hose
(into a basin).
• Fix the hose back onto the water intake.
• Remove the filters and use a sponge to draw water
up from the base.
CLEANING
When cleaning the appliance, you should pay attention
to the following:
• Remove plug from the mains socket, and allow the
appliance to cool down before cleaning it.
• Never submerge the appliance in water and make
sure no water enters the appliance.
• Clean the appliance by wiping it with a damp cloth.
A little detergent can be added if the appliance is
heavily soiled.
• Do not use scouring pads, steel wool or any form of
strong solvents or abrasive cleaning agents to clean
the appliance, as they may damage the external
surfaces of the appliance.
• The filters and the inside base of the appliance must
be cleaned regularly so that water can circulate
freely.
This appliance is intended to be used in household
and similar applications such as:
- staff kitchen areas in shops, offices and other
working environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
BEFORE GOING TO A REPAIR CENTRE
If the appliance still does not work, contact a repair
engineer.
ERROR WARNING CODES
When an error occurs, the appliance will use the
following error warning codes:
Problem
Possible causes
Solution
Replace fuse/switch
on relay.
Check the drainage
hose. It must not be
crushed or kinked.
Remove any impurities
from the coarse filter .
Check the drain.
Make sure that it is
functioning correctly.
Check that the
dishwasher arm
rotates freely and turns
a complete circle.
Check that the dishes
are arranged in the
rack in such a way
that water from the
dishwasher arm
reaches all the dishes.
Use more detergent
or try a different type.
Open door. Allow the
dishes to cool before
emptying the appliance.
Check that the
dishes are positioned
correctly.
Fill more dishwasher
rinse agent.
Allow more time for
the dishes to cool.
Close door completely.
The
appliance
does not
start.
Water
remains
in the
appliance.
The dishes
are not
clean.
The dishes
are not dry.
The fuse has
blown/relay has
been switched off.
There is a kink
in the drainage
hose.
The filters are
blocked.
The dishwasher
arm is blocked.
The dishes
are incorrectly
positioned in the
dishwasher.
There is too
little dishwasher
detergent.
Dishes are
incorrectly
positioned in the
dishwasher.
There is too little
dishwasher rinse
agent.
The appliance has
been emptied too
soon.
The problem may
be that there are
a relatively large
number of plastic
containers that
do not absorb as
much heat and
moisture as, e.g.
porcelain.
The drain is
blocked.
The door is not
closed completely.
Error warning
code
Description of
problem:
Possible
solution
Water intake is
blocked or water
pressure is too
low.
The appliance is
leaking.
The 3-in-1
indicator is
flashing
The glass
indicator is
flashing
The water is
entering more
slowly than
usual.
Abnormal
water level.
Содержание 1659-0008
Страница 44: ...44...