
46
Fire hazard!
• To reduce the risk of fire occurring
in the oven compartment, please
note the following points:
• Do not cook food for too long or at
too high a temperature and do not
leave unattended if paper, plastic
or other flammable materials have
been used with a view to reducing
cooking times.
• Metal clips and lids/film containing
metallic threads can cause sparks
and must therefore be removed.
• Never heat oil or fat in the
appliance.
• If materials in the appliance catch
fire, leave the door closed. Switch
off immediately, and remove the
plug from the wall socket.
KEY TO MAIN COMPONENTS
1. Door
2. Glass turntable
3. Cabinet
4. Lock dowels
5. Oven cavity
6. Turntable rings
7. Spindle
8. Display
9. Micro Power
10. Preset/Clock/Defrost
11. Instant/Start
12.
Pause/Cancel
13.
Dial
PREPARING THE APPLIANCE
Each individual appliance is checked
at the factory but, for safety’s sake,
after unpacking, check carefully that
your appliance has not been damaged
during transport.
Check whether there is any visible
damage (e.g. in the form of dents or
similar), if the door closes properly, if it
is intact and if the hinges are in order.
If the appliance appears to have been
damaged, contact the shop where
you bought it, and do not use it until
it has been checked by an authorised
specialist.
Before use, check that you have
removed all packaging inside and out.
Connection
The appliance must be connected
to a 230 volt AC current, 50 Hz. The
guarantee is not valid if the appliance
is connected to incorrect voltage.
Once the power is connected to the
appliance, all the segments in the
display will flash 3 times and then flash
“:” only.
Inserting the glass turntable
Before use, ensure the glass turntable
(2) is correctly seated on the turntable
rings (6) and spindle (7). Mount it on
the three wheels, with each wheel
aligned to the groove on the bottom of
the turntable.
Setting the clock
1. Hold the Preset/Clock/Defrost
button (10) pressed for 3 seconds.
The hours digits start flashing.
2. Turn the dial (13) clockwise or
anticlockwise to increase or
reduce the hours digits.
3. Press the Preset/Clock/Defrost
button. The minutes digits start
flashing.