MELAG MELAtronic 23EN, Руководство пользователя

Страница: 26 / 55

MELA tronic 23EN
26
Operation Display message
4. By pressing the "+" (or "-") button the following options can
be selected
5. After finding the required option, e.g. "Minute", press the
"Program" button and the current value flashes
6. Press "+" or "-" to increase or reduce the value:
7. Press "Program" to confirm the new value, which then
stops flashing.
If more adjustment are necessary, return to Point 4 and
begin again,...
8. ...or press "Start-Stop" to return to the "Function" menu,
and
9. Press "Start-Stop" again to return to the starting display
5.2 Use log printer MELAprint 42/44 as output medium _______________________
5.2.1 Connecting the log printer _________________________________________________________
In order to connect a log printer to the steam sterilizer then a printer cable should be connected between the
9-pole socket on the front of the steam sterilizer (see Fig.1, Pos. 3) and the 25-pole on the back of the printer
(ensuring a good connection and tightening the locking screws).
The power supply to the log printer is provided by the power unit supplied with the log printer, which connects
to the socket on the rear of the log printer.
Da t e / Tim e
M inut e : 2 8
Da t e / Tim e
Y e ar : 1 9
Da t e / Tim e
M ont h : 05
Da t e / Tim e
Da y : 1 4
Da t e / Tim e
S e c ond : 13
Da t e / Tim e
M inut e : 2 3
Da t e / Tim e
M inut e : 2 3
Da t e / Tim e
M inut e : 2 8
Func ti on:
Da t e / Tim e
1 4 :2 7 :12
- 0. 02 bar 25 °C