MELAG MELAtronic 23EN, Руководство пользователя

Страница: 22 / 55

MELA tronic 23EN
22
4.11 Manually terminate program __________________________________________
A program can be terminated at any time by pressing the "Start-Stop" button. If the program has not yet
reached the drying phase then the items will be non-sterile!
CAUTION! Steam may escape when the steam sterilizer door is opened.
If the sterilization phase of the program had not been completed, then it is advisable to carry out an empty
sterilization run before reusing the steam sterilizer.
Operation Display message
1. Press the "Start-Stop" button
To confirm, press the "Start-Stop" once again within 5 seconds.
If no confirmation is given then the program resumes normally.
2. If confirmation is given then the program stops.
The pressure inside the steam sterilizer will
then be equalised by pressure release.
After pressure equalisation, the display will alternately show the
messages "Terminated" and an offer to quit the program
termination.
3. To acknowledge the program termination, press the " - " button.
After a short time the display shows the selected program.
Stop program?
P re ss ‚ S TO P‘
P re ss ur e r elea s e
1 .5 2 bar 1 12° C
P r ogram
s t oppe d
S t op / E nd
0 .0 2 bar 8 8°C
Ac k now le dge
w ith but t on ‚ -‘
G e nt le - Pr ogra m
1 2 1° C w rappe d