Chapter 5 – Logging
39
Subsequent log issue
You also have the option of outputting the logs subsequently and
independently from the time of program end. You can select whether
selected or all saved logs (up to 40 logs) should be printed.
For this purpose the connected output medium is used, e.g. the log printer.
Output selected logs
In order to subsequently print selected logs of certain programs, proceed
as follows:
Select the menu
Function
by simultaneous brief pressing of the
K
EYS
(+) and (-).
The display shows
Function: Last batch number.
.
Navigate with the
KEY
(+) or (-) until on the display
Function:
Batch output
is shown and press the
KEY
(P).
The Menu
Batch output – Output medium
is displayed.
Navigate with the K
EY
(+) or (-) until the display
Last cycle output: No. 40
is shown (as example No. 40).
Press the K
EY
(P). The current report number blinks.
In order to output a log of another cycle, navigate with the K
EYS
(+) or
(-) up to the desired number, here e.g. 25.
Press the K
EY
(P) in order to start the output of the selected program.
The display shows
Output
.
After finished printout, the display changes again to its previous setting
Last cycle output: No. 25
.
In order to output additional logs, repeat the last three steps.
In order to leave the submenu without outputting, press
the K
EY
(S).
In order to leave the menu after the output, press the K
EY
(S).
The display shows the menu
Function: Batch output
.
By again pressing the K
EY
(S), you completely leave the menu and return
back to the basic position of the display.
Output all saved logs
In order to subsequently output all saved logs, proceed as follows:
Select the menu
Function
by simultaneous brief pressing of the
K
EYS
(+) and (-).
The display shows
Function: Last batch number.
.
Navigate with the
K
EY
(+) or (-) until on the display
Function:
Batch output
is shown and press the
K
EY
(P).
Navigate with the K
EY
(+) or (-), until the display
Output stored
cycles
is displayed.
Press the K
EY
(P) in order to start the output of the selected program.
The display shows
Output
.
After finishing the output the display again shows
Output stored
cycles
.
In case you would like to leave the submenu without printing, press
the K
EY
(S).
PLEASE NOTE
A termination during the output on the log printer is only possible by
disconnecting the unit at the mains switch or interrupting the power supply
of the printer.
In order to leave the menu, likewise press the K
EY
(S). The display
shows the menu
Function: Batch output
.
By again pressing the K
EY
(S), you completely leave the menu and return
to the starting position of the display.
Last cycle
output: No. 25
Output
stored cycles
