MELAG MELAquick 12+, Руководство пользователя

Страница: 38 / 66

Chapter 5 – Logging
38

Select "Select a program from a list of installed programs" and confirm
with "OK".

You can then open files with this ending via a double-click in Windows
Editor.
Automatic immediate log output
If you immediately would like to output the associated report automatically
on an output medium after the end of a program, use the function
Immediate output YES
. This is not preset in the initial delivery state.
Prerequisite for
automatic
immediate output of the logs
after the end of the program
The following prerequisites must be satisfied for the immediate log output
after the end of a program:

The computer, the log printer MELA print 42/44 or the MELA flash CF
card printer must be connected and initiated as output medium.
Proceed as follow in order to set the option for immediate log output after
program end:

Switch on the steam sterilizer at the mains.

Select the menu
Function
by simultaneous brief pressing of the
K
EYS
(+) and (-).
The display shows
Function: Last batch number.
.

Navigate with the
KEY
(+) or (-) until on the display
Function:
Batch output
is shown and press the
KEY
(P).

Navigate with the
KEY
(+) or (-) until on the display the submenu
Immediate output YES/NO
is shown.

Press the Key (P), in order to switch between
Immediate output
NO
and
Immediate output YES
.
In order to output logs immediately,
Immediate printout YES
must be
set.

In order to save the setting and to leave the menu again, press the
K
EY
(S). The display shows
Function: Batch output
.

By again pressing the K
EY
(S), you leave the menu completely and
return back to the initial state.
PLEASE NOTE
If it is not possible to output a log report for the immediate output because
for example the activated output medium is not connected, a warning
message appears. MELAG recommends that you employ the immediate
output of logs.
Immediate output
YES