meitav-tec ETN-24-SUPER-PROG, Руководство пользователя

Страница: 14 / 16

14
•
Press the “Select” button again – “COOL”
(flashing) and the set-point temperature for
cooling will appear on display.
•
Adjust the set-point temperature for cooling
using the “+” and “-” buttons.
•
Press the “Select” button again – “HEAT”
(flashing) and the set-point temperature for
heating will appear on display.
•
Adjust the set-point temperature for heating
using the “+” and “-” buttons.
The controller keeps a safety differential of at least 1 degree between
Heating set point and Cool set point (Heat is always less than Cool).
After selecting the heating set point, you cannot reduce the cooling
set point less than the heating set point.
Continue with the rest of the program
•
Press the “Select” button again - “PROGRAM 2” and “START”
(flashing) will appear will appear on display.
•
Press the “+” or “-” buttons and adjust the hours, minutes and
temperature,
the same way as in PROGRAM 1
•
Press the “Select” button again - “PROGRAM 3” and “START”
(flashing) will appear on display.
•
Press the “+” or “-” buttons and adjust the hours, minutes and
temperature,
the same way as in PROGRAM 1
•
Press the “Select” button: “PROGRAM 4” and “START” (flashing)
will appear on display.
•
Press the “+” or “-” buttons and adjust the hours, minutes
and temperature, the
same way as in PROGRAM 1
.
•
“SEND” will flash, press the “On/Send” button to send
the information to thermostat.