meitav-tec ETN-24-SUPER-PROG, Руководство пользователя

Страница: 12 / 16

12
In Heat Mode:
•
Press the “+” or “-” buttons - “HEAT” and set-point
temperature for heating will flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for heating.
•
Press the “On/Send” button to send the information to
the thermostat.
In Fan mode and in Auto Change-over mode:
•
Press the “+” or “-” buttons - “COOL” and set-point
temperature for cooling will flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for cooling.
•
Press the “Select” button – “HEAT” and set-point
temperature for heating will flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for heating.
•
Press the “Select” button again or Press the
“On/Send” button to send the information to the
thermostat.
The thermostat keeps a minimum differential of at least 1 degree
between Heat set and Cool set (Heat is always less than Cool).
7.5 Real Time Clock and Day
•
Press the “Select” button – “CLOCK SET” will flash.
•
Press the “+” or “-” buttons - the hours will flash.
•
Adjust the hours using the “+” and “-” buttons.
•
Press the “Select” button again – the minutes will
flash.
•
Adjust the minutes using the “+” and “-” buttons.
•
Press the “Select” button again – the weekday will
flash.
•
Adjust the day using the “+” and “-” buttons.
•
Press the “Select” button again to exit the program
or Press “On/Send” button to send the information to
the thermostat.