13
7.6 Programming
Set the Program times and Temperature settings for the week:
•
The thermostat is 5-1-1 programmable: weekdays (Monday to Friday),
Saturday, and Sunday can be programmed differently.
•
4 program events per day: 1 (Morning), 2 (Day), 3 (Evening), 4 (Night)
The program can be set away from the thermostat and can be sent later on.
To send the program to the thermostat, follow the steps below without adjusting
times and temperatures. Only press the “On/Send” button each time the word
SEND flashes on display (point the remote control to the thermostat)
The Remote control is used to enable / disable the thermostat Programmability.
To switch between Programmable and Non Programmable Configuration follow
these steps:
Press and hold the “Select” button of the remote for 3 seconds - the word
"program" will flash on display.
Press the “Select” button 3 more times until the "Timer icon" flashes.
Using the "+" and "-" buttons switch between a "Clear icon" (Disable) and "shaded
icon" (Enable).
The word "send" will flash on display.
Point the remote control to the thermostat and press the “On/Off” button to send
the information.
Programming Procedure
•
To enter programming, press and hold the
SELECT
button for three seconds -
“PROGRAM” (flashing) and the days Mon-Fri will
appear on display.
•
Press the “+” or “-” buttons, “PROGRAM 1” and
“START” (flashing) will appear on display.
•
Press the “+” or “-” button - the hours will flash.
•
Adjust the hours using the “+” and “-” buttons.
•
Press the “Select” button - the minutes will
flash.
•
Adjust the minutes using the “+” and “-”
buttons.
Содержание ETN-24-SUPER-PROG
Страница 16: ...16 ...