meitav-tec ETN-24-SUPER-PROG, Руководство пользователя

Страница: 11 / 16

11
7. RT08 - Hand Held Remote Control - Option
The remote control is Infrared; the remote must be pointed at the thermostat to operate.
Every time you change parameters in the Remote Control, you must send it to the thermostat
by pressing the “On/Send” button.
7.1 Turning the thermostat ON or OFF and Update information
•
Press the “On/Send” button to turn the thermostat ON and/or
update information.
•
Press the “Off” button to turn the thermostat OFF and
update information.
7.2 Auto Fan ON or OFF
•
Press the “Fan” button to change between:
ƒ Auto Fan OFF
ƒ Auto Fan ON
•
Press the “On/Send” button to send information to thermostat.
7.3 Modes
•
Press the “Mode” button to change between:
ƒ Cool
ƒ Heat
ƒ Auto change-over
ƒ Fan only
•
Press the “On/Send” button to send information to the
thermostat.
7.4 Temperature Set Point
In Cool Mode:
•
Press the “+” or “-” buttons -
“COOL” and set-point temperature for cooling will
flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for cooling.
•
Press the “On/Send” button to send the information to the thermostat.