IRIG settings
Several time codes are available for selection for the IRIG reference signals of the MRI.
1.
Open the
"Clock"
menu
→
"Status & Configuration"
2.
Select the respective clock module of the corresponding MRI module
3.
Click on the tab "IRIG settings".
4.
Configure a required input code and if necessary an offset to UTC.
These are to be configured in the
"Status & Configuration"
submenu in the " IRIG Settings" tab.
Menü: Configuration of IRIG-Timecodes
10.2 Status Monitoring of the Input Signals
This chapter describes the status monitoring of the IMS-MRI via the web interface.
Important parameters of the previously configured reference signals are displayed in the
MRI Status
tab of
the
"Status & Configuration"
submenu in the priority list. Among other things, the status and the offset of the
respective reference signal to the specified time source can be seen here.
A detailed explanation of all parameters can be found in the LTOS manual.
20
Date: March 21, 2022
IMS-MRI
