10 Configuration and Status Monitoring
10 Configuration and Status Monitoring
This chapter explains how to put an IMS-MRI into operation via the web interface.
10.1 Configuration of Input Signals
Four fixed input signals (time code AM, time code DCLS, 10 MHz and PPS) can be supplied via the MRI
module to synchronize the system.
MRS prioritization
The provided input signals are available for selection after initialization of the module and can than be config-
ured and monitored.
MRS setting: selection and prioritization of the available input sources.
1. Open the
"Clock"
menu
→
"Status & Configuration"
2. Select the respective clock module of the corresponding MRI module
3. Click on the tab "MRS settings".
4. Configure the reference signals shown in the priority list.
IMS-MRI
Date: March 21, 2022
19
