Meilhaus Electronic RedHand Scope, Руководство пользователя

Страница: 58 / 74

RedHand Scope60MHz Handheld DSO & DMM
7-Advanced Function of Oscilloscope
４９
2. Press the
MENU
▲
or
MENU
▼
key to select the Waveform Saving. Four items
selectable are displayed at the bottom of the screen.
3. Press the
F1
key to select the signal source CH1.
4. Press the
F2
key to select the address A.
5. Press the
F3
key to save the waveform on CHI1 in address A.
To display the saved waveform on the screen, do the following:
6. Press the
F4
key to select Start for the address A. The waveform saved in address A will be
displayed on the screen in green color.
The display color is green, and the zero point of waveform k, voltage and time is purple
Refer to figure 43
figure 43: Waveform Saving
7.9 Function Setting Menu
The
function setting
menu is described in the following list.
Function menu Setting Description
Factory setting Resume the instrument to its factory settings.
Self-correcting Perform the self-correcting procedure.
LANGUAGE CHINESE
ENGLISH
Select the display language of the operation system.
Self-correcting:
The self-correcting program can improve the accuracy of the oscilloscope under the ambient
temperature to the maximum. If the ambient temperature variation is equal to or larger than 5