RedHandScope60MHz
Handheld DSO & DMM
3-Performing the General Inspection
5
3. Performing the General Inspection
3.1 Performing the General Inspection
When you have got a new RedHand Scope series oscilloscope, it is suggested that you should
perform a general inspection on the instrument according to the following steps.
3.3.1 Check whether there is any Damage on it Due to Transportation
If the packing boxes or foam cushions are found in serous damage, keep them in a proper place till
the complete instrument and accessories have passed the electrical and mechanical tests.
3.3.2 Make a Check on Accessories
The accessory list has been described in the picture of Digital Oscilloscope Parts of this manual.
You can make a check and find whether there is any accessory loss with reference to the
Appendix. In case of any accessory loss or damage, consult the MEILHAUS ELECTRONIC
dealer responsible for such a business or the local office of MEILHAUS ELECTRONIC.
3.3.3 Make a Check on the Complete Instrument
If the instrument is damaged in its appearance or it fails in normal operation or performance test,
consult the MEILHAUS ELECTRONIC dealer responsible for such a business or the local office
of MEILHAUS ELECTRONIC. If the instrument is damaged due to transportation, keep the
packing in a proper place and consult the transportation department and the MEILHAUS
ELECTRONIC dealer responsible for such business, who will provide an instrument replacement
or maintenance.
