Meilhaus Electronic RedHand Scope, Руководство пользователя

Страница: 35 / 74

RedHandScope60MHz Handheld DSO & DMM
6-Using the Multimeter
26
6.4.1 Measuring Resistance Values
To measure a resistance, do the following:
1. Press the
R
key and
R
appears at the top of the screen.
2. Insert the black lead into the
COM
banana jack input and the red lead into the
V/ Ù
banana
jack input.
3. Connect the red and black test leads to the resistor. The resistor value readings are shown on
the screen in Ohm.
Refer to figure 21
figure 21: Resistance Measurement
6.4.2 Making a Diode Measurement
To make a measurement on the diode, do the following:
1. Press the
R
key and
R
appears at the top of the screen.
2. Press
AUTO SET
key till the following is displayed on the screen .
3. Insert the black lead into the
COM
banana jack input and the red lead into the V/
Ù
banana
jack input.
4. Connect the red and black leads to the resistor and the diode resistor readings are displayed
on the screen in
V
.