RedHandScope60MHz
Handheld DSO & DMM
5-Using the Scope
10
5.4 Navigating a Menu
The following example shows how to use the tool
’
s menus to select a function, as shown in the
following figure.
1.
Press the
MENU
key to display the Function Menu on the right of the screen and the
corresponding optional settings on the bottom. Press
MENU
again will hide the Function
Menu.
2.
Press the
MENU
▲
or
MENU
▼
key to select different function menus.
3.
Choose one key from
F1
to
F5
and press it to change function setting.
Refer to figure 5
figure 5: the Tool
’
s Menus
5.5 Manually Setting the Vertical System, Horizontal System
and Trigger Position
With the combination application of the four keys
OSC LEFT
,
OSC RIGHT
,
OSC UP
and
OSC
DOWN
, the users can make the following settings circularly by pressing
OSC OPTION.
The
settings include: Voltage Unit Scale of Channel 1 (
CH1 VOL
); Voltage Unit Scale of Channel 2
(
CH2 VOL
); Primary Time base (
TIME BASE
), zero point position of channel 1(
CH1 ZERO
),
zero point position of channel 2(
CH2 ZERO
), trigger horizontal position (
TIME
) and trigger
level position (
TRIG
).
The following example shows how to use
OSC OPTION
key to make a setting.
1.
Press once the
OSC OPTION
key; the following is displayed at the bottom left side of the
screen, as shown in the figure below.
