Meilhaus Electronic ME-5004, Руководство пользователя

Страница: 7 / 39

1.2 Package Contents
We take great care to ensure your delivery is complete. Nonethe-
less, please check the list enclosed to verify the contents of your
delivery. You should find included:
 Opto-isolated digital-I/O board used as a plug-on board for the
base boards of the ME-5000 series.
 Manual in PDF format on CD/DVD.
 Driver software on CD/DVD.
 37-pin D-Sub mating connector.
1.3 Features
The plug-on board of type ME-5004 is an opto-isolated digital-I/O
board with bit-pattern detection for the base boards of the ME-
5000 series. You can configure individual subdevices alternatively
for frequency measurement resp. pulse generator on demand (see
chapter 4 from page 21).
Overview
Model DIO FIO* Sink/
Source
Bit-Pattern
ME-5004
(Subdevice 0)
16-bit DI
(opto-isolated
8 FI channels
(opto-isolated) -
- change
- compare
(Subdevice 1) 16-bit DO
(opto-isolated
8 FO channels
(opto-isolated)
✔
-
*Alternative configuration can be activated via ME-iDC.
 Opto-isolated digital-inputs: The ME-5004 has 16 opto-iso-
lated inputs (subdevice 0). The inputs run with a voltage high-
level of 24 V typ. (specifications see page 29).

Opto-isolated digital-outputs: The ME-5004 has 16 opto-iso-
lated outputs (subdevice 1). The source-driver can drive up to
500 mA per pin. The detailed specifications of the sink and /or
source drivers can be found on page 15.
The source drivers are short-circuit-proof and are equipped
with a current limiting per channel. If required, the output
driver can send an interrupt on overload to the PC.
A suitable external source is required to supply the output driv-
ers.