Meiko Computing Surface CS-2, Руководство пользователя

Страница: 18 / 52

8
S1002–10M128.02
3
Warning – Your attention is drawn to the lifting instructions in Safety Pre-
cautions on page i.
The bay may carry a number of Beta Phase connections to the module. These
connectors must be opened using the Meiko Beta Phase Controller before the
module tray is pushed into position.
Warning – Failur e to open the Beta Flex connectors befor e pushing the mod-
ule trays into position will damage your equipment.
With the Beta Phase connectors held open by the Beta Phase Controller push the
module tray into position. On each of the telescopic arms is a spring slip that
must be pushed-in to allow the arm to slide. Push the tray into position carefully ,
ensuring that the Beta Phase connectors are correctly situated. Lock the module
tray into position using the two captive screws at the front of the tray .
After pushing the module tray into position use the Beta Phase Controller to close
the connectors.
Using the Meiko Beta Phase Controller
Connect the Beta Phase controller to the 37-way connector located behind the
module mounting position. Connect the Beta Phase Controller to a mains outlet
using the supplied cable. Use the Activate button on the box to open all the Beta
Phase connectors used by that module — pressing the same button a second time
will close the connectors. Status lights on the box show the condition of each
connector; red indicates open, amber indicates power is being applied, green in-
dicates no power. When using the Controller it is safe to hold the Beta Phase con-
nectors open for prolonged periods.
Power Supply
Check that the voltage and frequency of your power supply is suitable for your
equipment. The power supply unit is auto-ranging, 110–230 V, 50/60/400 Hz.
Maximum current is 15 A.