Meiko Computing Surface CS-2, Руководство пользователя

Страница: 17 / 52

7
Installing the Processor Module
3
You must read this chapter thoroughly and completely before using your CS-2
module.
Location
The processor module must be located in a CS-2 Bay. This provides a firm level
support for the module and has been designed to maximise the flow of cooling
air through the module.
Warning – Overheating can damage this pr oduct. Do not block or cover any
openings that ar e built into the module, and do not place the module near
any sources of heat.
Modules sit on module trays that are fixed to the bay by telescopic rails. The tray
must be extended from the bay before a module may be loaded onto it or removed
from it.
Warning – Never extend mor e than one loaded module tray .
To extend the tray first unscrew the two retaining screws and then pull the tray
forward. Lift the module onto the tray ensuring that the feet on the base of the
module mate with the holes in the tray . Fix the module into position using the
captive screws on the underside of the tray .