Operating instructions dishwashing machine model B-Tronic
Datei:BA_B-Tronic_MIKE_9636176_EN_2006-08.doc
Update: 2013-06-10, S. 4-13, 41
9636176
7/66
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
3 General description and use for the purpose intended
3.1 General description
This machines is a pass-through warewasher with a conveyor belt. On the feeding side
the dishware is automatically or manually placed onto the conveyor belt and is
independently transported through the machine on the moving conveyor belt. The
dishware is cleaned and, if applicable, dried. On the other side of the machine, the
discharge side, the dishware is removed automatically or manually.
3.2 Use for the purpose intended
The dishwashing machine must be used only in accordance with regulations.
This dishwashing machine is intended for washing cutlery, crockery and commonly used
kitchen utensils.
Other special dishware is described in the job confirmation.
The items to be washed must be suitable for washing in dish-washing machines.
If in doubt with regard to suitability, consult Meiko about the size, version, essential
suitability for warewashers ...) ([email protected]).
Kitchen utensils with electronic components must not be cleaned in the machine.
Any other use is not considered intended.
This dishwashing machine is intended solely for use in a commercial environment.
4 CE-Declaration of Conformity
A Declaration of Incorporation is provided with the machine if it is not supplied in fully
operational state, that is, as a partially completed machine pursuant to the Machine
Directive.
An EC Declaration of Conformity is provided with the machine if it is supplied in fully
operational state as a complete machine.
Danger!
Feeding side
Discharge side
Drying
Machine conveyor belt