Operating instructions dishwashing machine model B-Tronic
Datei:BA_B-Tronic_MIKE_9636176_EN_2006-08.doc
Update: 2013-06-10, S. 4-13, 41
9636176
55/66
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
22 Maintenance recommendation
Service step
Maintenance
Cleaning
works
Daily
At least
once
quarterly
At least once
or twice a year
but
every
1000 h
At least once
yearly
but
every
2000 h
1. General cleaning
Screen basket
Tank cover screen
Pump suction side sieves
Spray protection curtains
Wash- and rinse arm jets
Wash tanks
Float valve housing of the water level monitoring
2. Conveyor drives
Check drive motor
Check drive motor for exterior damage
Check drive motor for quiet running
Check current consumption
(
I
N
see wiring diagram)
Check ventilation grid for cleanliness
Check drive chain
Check chain wheels, chain and chain adjuster for wear and tear
Check chain adjuster function
Check chain tension
Regrease chain if necessary (spray-on penetrating oil or silicone spray)
Check conveyor limit switch for correct disconnection
Check electrical function of the limit switch
Check limit switch for mechanical damage
Check limit switch function with regard to the lag (the distance the
conveyor runs after being switched off). The mechanical contact travel of
the limit switch rocker must be greater than the conveyor lag.
Check conveyor overload switch for correct disconnection
Check switch for electrical function
Check limit switch for mechanical damage
Check switch function with regard to the overload disconnection
3. Conveyor tension station
Check conveyor tension. It must be possible to lift the conveyor belt by
about 10 cm in the free entry or exit section
Check conveyor diverter wheels and fixing rings for damage and correct
position
