Operating instructions dishwashing machine model B-Tronic
Datei:BA_B-Tronic_MIKE_9636176_EN_2006-08.doc
Update: 2013-06-10, S. 4-13, 41
9636176
39/66
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
12 Cleaning
12.1 Safety instructions for cleaning
The tank heating elements may still be hot after the tank has been emptied. There is
therefore the danger of burns when the machine is cleaned manually.
Electrical components, switch cupboards and other electrical components may not be
sprayed with a water hose or high-pressure cleaner.
12.2 Cleaning after operation
It is recommended that you maintain the machine in good condition not only for reasons of
hygiene but also to keep your dish-washing machine in full working order and to be able to
recognise damage more easily. Observe the following points after operation.
Clean and check that the machine is in working order:
Tank cover screen
Side screen supports
Pump screen (suction side)
Spray protection curtains
Wash pipe jets
Wash tanks
Rinse arm jets
Any cladding panels removed to undertake this work must be replaced in their original
position after completion of the work. Ensure that all the parts are correctly installed.
ATTENTION!
ATTENTION!