•
Mount the lamp house onto the microscope. The three screws that engage
the dovetail fitting should be equally tight, the lamp house should be
mounted perpendicular and the lamp house should not be able to turn in
its mount when tightened properly.
•
Connect the cable assembly from the lamp house to the power supply
being mindful of the position and polarity of the connector. Match the pins
from the cable to the panel connector. When properly aligned, the cable
connector twists and engages the panel connector and screws all-the-way
inwards.
The power supply is ready to be plugged into the wall using a standard localized
cordset.
The mains power cord should only be plugged into a known grounded
outlet.
Contact your facilities technician if you are unsure of your mains outlet status. A
simple outlet tester can be used to verify correct outlet polarity and the presence
of a grounded circuit.
If no other accessories are going to be installed, the power supply is now ready
for use.
