Meiji Techno FL-LHJ Скачать руководство пользователя страница 5

These symbols are used throughout this instruction manual. For your safety, be 
sure to follow all instructions associated with the symbols listed below. 
 

   Disregarding instructions marked with this symbol may lead to 

serious bodily injury or possibly death. 
 

   Operational warning; failure to operate equipment properly may 

result in damage or injury. 
 

   Possible electrical shock hazard exists 

 

    Disregarding instructions marked with this symbol may lead to 

serious injury or property damage. 
 

     Caution for heat or hot surfaces. Risk of burns or serious injury! 

 

   This symbol designates technical note or product tip. 

 
 
1.4 Intended Product Use 

 

Product Disclaimer:

 This product is designed and intended for use only as a 

biological microscope illumination system. Modifying this product in any way for 
use in any situation other than the original and intended product design will 
automatically void the warranty. In no event shall Meiji Techno be liable to any 
person for any incidental, indirect or consequential damages, arising out of or in 
connection with the use or performance of a modified or altered product.

 

 
1.5 Product Safety Information

 

          

 

 

     

 This product is not intended to be used in the immediate vicinity of 

water or a water outlet or placed in any location where water may penetrate the 
instrument. Water penetration may result in electrical shock or death. Choose only a 
suitable environment for your microscope. 
 
Do not subject the product to extreme temperature fluctuations. Extreme 
temperature changes may lead to condensation within the unit which may result 
in damage to components.  
 

Содержание FL-LHJ



























Отзывы: