37
Figure 4-5 save the Settings page
2) click the restore BFM factory Settings button. The system initializes the thermostat and uploads all
parameters.
4.2.4 download and upload
After the completion of parameter configuration, the user can right-click the site N under the configuration
of the tree structure module, and select the download menu from the pop-up right-click menu
Item to download the configuration parameters to the MTC of the corresponding site. The upload menu
item reads the configuration parameters from the corresponding thermostat.
4.2.5 monitoring
When the relevant PLC system is in operation state, and the PC is connected to the PLC main module by
programming cable, the user can monitor the thermostat in real time through the monitoring function set
by the MTC wizard. The relevant operation methods are shown in the following table.
Table 4-1 monitoring methods
Operation type
Method of operation
Start monitoring
Method 1
Click menu
monitor
->
Start monitoring
Method 2
Right-click the monitoring item of the tree structure, the right-click
menu pops up, and select start monitoring
Stop monitoring
Method 1
Click menu
monitor
->
Stop monitoring
Method 2
Right-click the monitoring item of the tree structure, the right-click
menu pops up, and select
stop monitoring
Delete monitoring
data
Click the menu monitor ->Delete the monitor data
Click the relevant site under the tree structure monitor and the real-time monitoring information of the
relevant thermostat will be displayed on the right side of the MTC wizard Settings. There are two kinds of
