Megmeet MTC-08-NT, Руководство пользователя

Страница: 15 / 58

15
time 0 ~
900(minutes)
#411/#487 #430/#506 #449/#525 #468/#544
Step 4 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W Y
#412/#488 #431/#507 #450/#526 #469/#545
Step 5 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W Y
#413/#489 #432/#508 #451/#527 #470/#546
Step 6 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W Y
#414/#490 #433/#509 #452/#528 #471/#547
Step 7 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W Y
#415/#491 #434/#510 #453/#529 #472/#548
Step 8 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W Y
#416/#492 #435/#511 #454/#530 #473/#549
Repeat start step *
3 Default value :2,
range:1~8
R/W Y
#417/#493 #436/#512 #455/#531 #474/#550
Repeat end step * 4
Default value :0,
Range:0~99
R/W Y
#418/#494 #437/#513 #456/#532 #475/#551
Multi-step control
state * 5
Default value :0,
Range:0~99
R/W Y
#552
Multi-step control
execution flag of
CH1
～
CH8 * 6
Set 1-8 channels,
default
value :B0000
R/W Y
0:No multi-stage
control
R/W Y
1: perform
Multi-step control
R/W Y
* 1. #400 ~ #407, #419 ~ #426, #438 ~ #445, #457~#464,#476~#483,#495~#502,#514~#521,
#533~#540: temperature Settings for each channel segment. The unit is determined according to each
input type. When the mode is Celsius, the unit is 0.1
℃
; when the mode is Fahrenheit, the unit is 0.1
℉
.
* 2. #408 ~ #415, #427 ~ #434, #446 ~ #453, #465 ~ #472,#484~#491,#503~#510,#522~#529,
#541~#548: execution time of each channel segment. When running multi-step Settings, the first stage
execution time of each channel cannot be set to 0.
* 3. #416, #435, #454, #473,#482,#491,#500,#509: the starting segment number that needs to be
repeated when setting the multi-step setting of each channel.
* 4. #417, #436, #456, #474,#493,#512,#531,#550: the termination number that needs to be repeated
when setting the multi-step setting of each channel. The end segment number must not be less than the
start segment number of the channel, otherwise an execution error will result.
* 5. #418
、
#437
、
#457
、
#475
、
#494
、
#513
、
#522
、
#541: set the number of repeats for each channel.
* 6. #552: multi-step set enabled. #552 is effective with 8 bits less, the multi-step set function of Bit0
control channel 1 is start, the multi-step setting function of Bit1 control channel 2 is started, and so on.