VNA0440
–
VNA0440e
VNA0460
–
VNA0460e
user manual V3.1
- 30 -
The sweep can be changed by using the
Select sweep
button. This will open the
Sweep
Manager
screen.
Sweep Manager
The sweep manager allows you to select sweeps and to define new sweeps or deleting
one.
On the left is a list with available sweeps. When one of them is highlighted the right part
of the screen shows the setup of the sweep.
To select a sweep, highlight it in the list and use the
Select
button. One can also
double-
click
the desired sweep.
Nested sweeps
The
Power-Frequency
sweep shown here has two sweep parameters: Power and
Frequency. A sweep is performed from top to bottom: for each step in the upper parameter
a sweep of the lower parameter is performed.
