www.megger.com
PAT400 Series
61
Logging Out & Power down
Unless the operator has logged OUT of their account on Power-down, the operator will remain logged IN to the PAT400 on Power-up.
To log out of an account either:
1)
Press the RED power OFF button. The display will show the Message:
“It is now safe to remove power”
“You will be logged out”
2)
Remove power from the PAT400 (see note).
OR
1)
Go to the “Users” menu and select Login/Logout (see note).
2)
Press OK. The operator will be logged out. The PAT400 will display a Login screen.
3)
Remove power to the PAT400
Note: With a Default only account and no PIN set (as shipped from the factory) the Login/Logout options are not available
11.3
Managing accounts
11.3.1 Supervisor and User status
The PAT400 has two levels of account status, Supervisor and User. The account status is set when creating or editing an account:
a)
Supervisor status – Supervisor box checked
An account with “Supervisor” status has unlimited access to all functionality and configuration of the PAT400.
Any account with “Supervisor” status can create additional accounts and control the status of other accounts, including
deleting other accounts.
b)
User status – Supervisor box unchecked
An account with “User” status has limited access to functionality.
A “User” status account would be allocated to an operator where it would not be desirable to allow the operator full access to
the configuration of the PAT400, or the deletion of customer and test data.
RECOMMENDED
